Canon printers are mostly used and are
the most famous printing devices among users across the earth. Like
every other printer, Canon printers too come under the category of
severe technical issues surprisingly. So, here we will have a look at
common types of Canon printer errors with their relevant solutions.
Many Canon Printer users, searches the
solutions to Fix Canon Printer Error Code 5b02, to get rid the
worrisome situation. Well, the error indicates that the waste Ink
absorber is full because the Canon printer does not see the absorber,
it just calculates the number of prints, and when a set number is
reached, the error code is triggered, and the printer locks up. To
remove the error then, all you have to do is to reset the counter,
but if you don't take care of the sponge and the printer will start
leaking ink from the bottom (may be months before you see this). Then
don’t worry about it, if you are unable to solve this issue by your
ends. Just contact at Canon Printer Support team to connect
with professionals, and get instant help & service to remove the
error.
Therefore, here’s, two possible ways
for resetting error code 5b02 in Canon Printers:-
Canon Printer Error Code 5b02
Methods to Fix Canon Printer Error Code
5b02:-
First Method:-
Before starting the method, from the
“Service Tool”, make sure that have paper loaded, then follow
these steps now.
Step 1:-Select “Region” Option
Go to “Set Destination” section,
and then hit the drop-down arrow (JPN) in front of “Region,” and
then select “USA” option. Then click “Set” option (you get
“The function is fished)
Step 2:- Hit Set-Printer Prints One
Sheet
Then, go to “Clear Ink Counter”,
and then click the drop-down arrow (Main) in front of Absorber: and
then choose “Main-Black”, and then hit “Set” option (The
printer prints one sheet).
Step 3:- Hit Set-Printer Prints One
Sheet Another Sheet
Next, you will need to go to the “Ink
Absorber Counter” section, and then click the drop-down arrow
(Main) in front of “Absorber”, and then select “Main-Black”,
and then hit “Set” option (The printer prints one sheet another
sheet).
Step 4:- Click “EEPROM” Option
Go to “EEPROM” section, and the
printer prints one sheet.
Step 5:- Select “Auto” Option
Now you need to click “Auto” on the
top right of the “Service Tool Window”.
Step 6:- Click “Test” Print
After that do a simple click “Test
Print,” and then wait until all done.
Then restart the printer, and you
should be good to print again.
Second Method:-
The following instructions will enable
the user to perform the reset mentioned above.
Step 1:- Unplug the Power Cable From
Canon Printer
First, unplug the power from the Canon
printer and all connections (including USB to the PC as well).
Step 2:- Hold the “Start” Button
and Next, press and hold the “Start”
button while plugging the power back into the printer.
Step 3:- Press the “Resume” Button
While still press and hold the “Start
button,” press the “Resume” button twice. It allows for Removal
of Ink Cartridges.
Step 4:- Repeat Steps
Now you need to do to repeat Step 1 and
then repeat Step 2 above.
Step 5:- Resume Button
Then you need to press the “Resume”
button four times (note that the light will only flash the first two
times of the four times that you press the button)
Step 6:- Check Error Is Fixed
The error should now have cleared so
that you can use the printer.
After performing all the above steps,
your Canon Printer Error Code 5b02 will surely fix.
In any case, the problem still appears,
and then you must take Canon Printer Support service experts help.
Avail 24*7 Online Help, Dial Canon Printer Tech Support Number
1-888-776-6941 Now. This number is toll-free and available 365 days
to give you quickly help & support to your Canon printer
technical issues. The experienced technicians will assist you in
resolving any complicated Canon technical issues with the reliable
and optimized solution in less time. Hence, connect now with experts
to get instant help.
