How to clear error 5B02 on Canon Printer

Canon printers are mostly used and are the most famous printing devices among users across the earth. Like every other printer, Canon printers too come under the category of severe technical issues surprisingly. So, here we will have a look at common types of Canon printer errors with their relevant solutions.

Many Canon Printer users, searches the solutions to Fix Canon Printer Error Code 5b02, to get rid the worrisome situation. Well, the error indicates that the waste Ink absorber is full because the Canon printer does not see the absorber, it just calculates the number of prints, and when a set number is reached, the error code is triggered, and the printer locks up. To remove the error then, all you have to do is to reset the counter, but if you don't take care of the sponge and the printer will start leaking ink from the bottom (may be months before you see this). Then don’t worry about it, if you are unable to solve this issue by your ends. Just contact at Canon Printer Support team to connect with professionals, and get instant help & service to remove the error.

Therefore, here’s, two possible ways for resetting error code 5b02 in Canon Printers:-

Canon Printer Error Code 5b02

Methods to Fix Canon Printer Error Code 5b02:-

First Method:-

Before starting the method, from the “Service Tool”, make sure that have paper loaded, then follow these steps now.

Step 1:-Select “Region” Option

Go to “Set Destination” section, and then hit the drop-down arrow (JPN) in front of “Region,” and then select “USA” option. Then click “Set” option (you get “The function is fished)

Step 2:- Hit Set-Printer Prints One Sheet

Then, go to “Clear Ink Counter”, and then click the drop-down arrow (Main) in front of Absorber: and then choose “Main-Black”, and then hit “Set” option (The printer prints one sheet).

Step 3:- Hit Set-Printer Prints One Sheet Another Sheet

Next, you will need to go to the “Ink Absorber Counter” section, and then click the drop-down arrow (Main) in front of “Absorber”, and then select “Main-Black”, and then hit “Set” option (The printer prints one sheet another sheet).

Step 4:- Click “EEPROM” Option

Go to “EEPROM” section, and the printer prints one sheet.

Step 5:- Select “Auto” Option

Now you need to click “Auto” on the top right of the “Service Tool Window”.

Step 6:- Click “Test” Print

After that do a simple click “Test Print,” and then wait until all done.

Then restart the printer, and you should be good to print again.

Second Method:-

The following instructions will enable the user to perform the reset mentioned above.

Step 1:- Unplug the Power Cable From Canon Printer

First, unplug the power from the Canon printer and all connections (including USB to the PC as well).

Step 2:- Hold the “Start” Button

and Next, press and hold the “Start” button while plugging the power back into the printer.

Step 3:- Press the “Resume” Button

While still press and hold the “Start button,” press the “Resume” button twice. It allows for Removal of Ink Cartridges.

Step 4:- Repeat Steps

Now you need to do to repeat Step 1 and then repeat Step 2 above.

Step 5:- Resume Button

Then you need to press the “Resume” button four times (note that the light will only flash the first two times of the four times that you press the button)

Step 6:- Check Error Is Fixed

The error should now have cleared so that you can use the printer.

After performing all the above steps, your Canon Printer Error Code 5b02 will surely fix.

In any case, the problem still appears, and then you must take Canon Printer Support service experts help. Avail 24*7 Online Help, Dial Canon Printer Tech Support Number 1-888-776-6941 Now. This number is toll-free and available 365 days to give you quickly help & support to your Canon printer technical issues. The experienced technicians will assist you in resolving any complicated Canon technical issues with the reliable and optimized solution in less time. Hence, connect now with experts to get instant help.